Sale

C4 Rail, 12in Front Sight Pocket Rail Handguard (for Carbine Gas Systems) - BLEM

SKU:
060912P-BLEM
Availability:
Usually Ships in 2 to 3 Business Days - Custom Cerakote Lead Times Vary (See Disclaimer Below)
$350.00 $320.00
(No reviews yet) Write a Review

*THESE ITEMS ARE FUNCTIONALLY SOUND, BUT MAY HAVE COSMETIC BLEMS AND/OR MAY BE AN OLDER MODEL**

**PHOTO DOES NOT SHOW ACTUAL PRODUCT/BLEMISHES/ETC**

**NO RETURNS FOR ANYTHING OTHER THAN FUNCTIONAL DEFECTS**


Description

The Centurion patented C4 rail system is a lightweight, rugged, 2 piece free float rail that when installed gives the uppers a continuous 12o'clock rail. The C4 system is the lightest and most rigid rail that clamps to a standard barrel nut on all AR15, M4, and M16 type weapons systems. This design allows the installation of the rail on an upper assembly without removing the front sight post or permanently attached muzzle devices. **Please note that some FSBs may need to be modified to fit by filing down the longer sling attachment ears so that they are not touching the handguard

Fits MIL-Spec uppers.  Many billet uppers will not accept the alignment tabs without modification.  



*** We recommend gunsmith installation for all of our parts.  We cannot warranty items damaged by improper installation.

Features

Material: 6061 T6

Finish: : type 3 hard coat anodized

Weight: 14.2oz with screws---1.1oz with standard barrel nut

Length: 12.56in (pocket located for carbine length front sight post)

Width: 2.1in

Height: 2.38in

Inside diameter: 1.37

Rails: 1913 spec rail

Fasteners: grade 8 bolts phosphate finished

 

MADE IN USA

***Please Note***

- Screws are included with the purchase of all rail systems and replacement screws are available to purchase if necessary

- Hex wrenches/keys are not included but installation will require 9/64" and 3/32" SAE Hex Keys

 

ONE YEAR LIMITED WARRANTY Centurion Arms warrants the initial retail purchaser that all Centurion Products will be free of defects in workmanship and material for a period of one year from the date of purchase. Centurion Arms will replace any part found to be defective. Centurion Arms is not responsible for any damaged products caused by improper installation or improper installation procedures. All Centurion Arms products should be installed by a properly trained gunsmith or armorer. Centurion Arms designs products around US Mil Spec components and there may be some components out there that do not conform. Centurion Arms will not warrant any product that has been altered or modified by the customer in any way. Centurion Arms does not recommend installation of C4 rail on barrels with pinned/welded muzzle devices and does NOT warrant labor with regards to removing pinned and welded muzzle devices That is to be worked out by the end user and the installer.