**THESE ITEMS ARE FUNCTIONALLY SOUND, BUT MAY HAVE COSMETIC BLEMS AND/OR MAY BE AN OLDER MODEL**
**PHOTO DOES NOT SHOW ACTUAL PRODUCT/BLEMISHES/ETC**
**NO RETURNS FOR ANYTHING OTHER THAN FUNCTIONAL DEFECTS!**
Our patented CMR rail system is a lightweight, rugged, one piece, free float hand guard that, when installed, gives the upper a continuous 12 o'clock rail. The CMR system clamps to a proprietary barrel nut that can be installed on 7.62/.308 based AR platform systems. It was designed with the top 1913 rail for mounting the most common accessories, yet does away with the need for 1913 rail at the 3, 6, and 9 o'clock positions and using the MLOK mounting system. Additionally, we built in anti-rotation QD sling swivels in 4 positions. The main objective was to have a smaller, lighter weight, more ergonomic, hand guard that maintains or enhances functionality for the end user. As professional end users ourselves, we know the importance of keeping things simple and that was our design intent here... a K.I.S.S. (keep it simple, stupid) system.
***Current CMR MLOK models are DPMS high pattern receivers***
Material: 6061 T6
Finish: Type III hard coat anodized
Integrated QD Attachment sockets - Limited Movement
Weight: 13in-15 oz with barrel nut | 15in-16.3 oz
Barrel nut: 4.6 oz 2.5 in long / 1.53 O.D. / I.D. to fit up to 1.2 in barrel
Length :13in (13in) | 15in (15in)
Width: 1.61 in (body of tube) 1.96 in (at QD Sling Swivels)
Height: 2.121 in
Inside Diameter: 1.441 in
Barrel nut: 4130 steel and 2.5in long
Made in USA
***IMPORTANT PLEASE NOTE***
-Currently our gas block is the only one that Centurion Arms can guarantee to fit under the CMR. This is due to the CMR's extreme low profile.
- Screws, proprietary barrel nuts, and wrench are included with the purchase of these rail systems. Replacement screws, barrel nuts, and wrenches are available to purchase if necessary.